Lightbox question

Discussion in 'Media Pro Gallery' started by Ben_Bftg, Jul 6, 2018.

Thread Status:
Not open for further replies.
  1. Ben_Bftg

    Ben_Bftg Member

    13
    0
    I am using the mediaPro Gallery for photos and video content.
    How do you show ONLY the video you want when you use the you tube code. The problem is after the video has shown, all other youtube videos are loaded into the lightbox to be played. How do I isolate just my vedios and the videos I want featured?

    Question 2, how do you stop the slide show from sliding? it moves to the next photo or video before a video has finished playing.
    Ben
     
  2. DjHerold

    DjHerold Moderator Staff Member Advisory Group

    3,387
    251
    Ben, stopping the 'Next' videos on YouTube has always been an ongoing challenge.
    There is always something changing in YouTube.
    You used to be able to add ?real=0 to the end of the video code and it would stop the others. But, I've found that lately, that isn't reliable. You can try, or I'd suggest Googling this topic and try some of the other options.
    Some people have had success by disabling the function within YouTube.
    As far as your other question is concerned, in the widgets Settings panel there is a Autoplay drop down (see attached), that lets you shut off the auto play function. This also happens automatically when the Thumb of the Video is selected, but not when the larger image in the Light box is selected.
    If you don't need the auto advance function, use the setting option.
    Hope this helps
    Dj
    Capture.JPG
     
  3. Ben_Bftg

    Ben_Bftg Member

    13
    0
    Thank you DJ
    I will google it and see what I can do. Thank you for your reply
     
  4. DjHerold

    DjHerold Moderator Staff Member Advisory Group

    3,387
    251
    Ben, Glad to have helped.
    Dj
     
Thread Status:
Not open for further replies.

Share This Page